Tile-Brite 4×1 Gal Cleaner
(Concentrated Hard-Surface and Bathroom, Ceramic Tile, Tub and Grout Cleaner)
TILE-BRITE is a concentrated, non-abrasive hard surface and tile and tub cleaner. Its concentrated form allows for an “extremely” economical usage cost, and its ingredients permit the product’s broad spectrum use across a variety of hard surface and bathroom sanitation applications. Product can be effectively used at ratios of 5 to 10:1 depending on nature and degree of soil
CDC recommendations allow for use of non-registered products such as TILE-BRITE for control and remediation of C-Diff and the Norovirus for general hard surface sanitization, and for treatment of known infection outbreak locations if used according to the below guidelines.
Once diluted, this product can be safely used to effectively clean fiberglass enclosures, ceramic tile, porcelain, chrome, shower doors, and plastic wall tile. The product contains a sodium hypochlorite adjunct which also allows for sanitization where chlorine bleach is recommended, and also provides excellent grout treatment for mold and mildew. TILE-BRITEleaves no film when properly utilized.
DIRECTIONS FOR DILUTION OF CONCENTRATED TILE-BRITE
For general hard surface cleaning, dilute product as follows:
A) To a 1 gallon container – Add 12 to 21 ounces of TILE-BRITE. Fill with water to top.
B) To a quart bottle – Add 3 to 5 ounces of TILE-BRITE. Fill with water to top.
C) Through a dispenser – Dilute to a 5:1 solution.
For known C-Diff location remediation, dilute as follows: A TILE-BRITE solution of a minimum of 12 ounces per gallon dilution rate is recommended for effective kill within 15 minutes. (16 ounces per gallon for effective kill within 10 minutes).
For known Norovirus location remediation, add 21 ounces of TILE-BRITE to one gallon of water can be used for a saturated coleaning
DIRECTIONS FOR USE OF TILE-BRITEÔ – After dilution
For General Cleaning, Spray from container directly on hard surface to be cleaned. Allow to set for 2 or 3 minutes. Use wash rag or brush to agitate residue on walls. Rinse with warm water. Dry with clean cloth. Will remove soap buildup and grime on walls, floors, shower doors and shower curtains. Allow longer contact time for mold and mildew buildup on grouted surfaces.
For both C-Diff and NOROVIRUS remediation, apply product solutions as directed above to contaminated area, and allow affected areas to remain damp with product for 10 to 15 minutes depending on strength of cleaning solution.
TILE-BRITEÔ is packaged in 4 x 1 gallon cases
Keep away from children, and from colored fabrics. People with sensitivity to chlorine should wear rubber gloves during use. If splashed on skin, flush liberally with water. Do not mix this product with ANY other chemicals as noxious gasses may be formed. For industrial/institutional use only.